Panasonic AJ-YAX800 - Manual (Page 5)

ENGLISH
4 (E)
1
Turn off the P2 cam.
A P2 PROXY card will not be
recognized if it is inserted in the
camera while the power is on.
2
Remove the two screws, and lift off
the cover of the OPTION slot.
4
Replace the cover of the OPTION
slot, and refasten with the two
screws.
3
Confirm that the eject button is
depressed, and then insert a P2
PROXY card into the slot.
EJECT button
Installing a P2 PROXY card
Insert a P2 PROXY card into the OPTION slot of the P2 cam.
Note that the card should be inserted in P2 card slot No. 5 if another card is
already inserted in the OPTION slot.
Inserting a card into the OPTION slot
Removing the P2 PROXY card from
the OPTION slot
1 Press the eject button, and confirm
that the button has popped-up.
2 Press the eject button again.
This operation releases the P2
PROXY card. Remove it from the
slot.
Inserting a P2 PROXY card into the
P2 card slot
Please be sure to insert the P2 PROXY
card in the No. 5 slot. Proxy data
recording will not be performed if the P2
PROXY card is inserted in a different
slot.
For more information about inserting
cards, see the P2 cam’s instruction
manual.
5