Troubleshooting, Headset – Plantronics Savi W730-M User Manual

Page 33

Advertising
background image

Talk time performance is
significantly degraded even after a
full recharge.

Battery is wearing out. Contact us at

plantronics.com/support

.

I can’t hear a dial tone in the
headset.

Make sure your headset is charged.
Make sure your headset is subscribed to base. See

Base

subscription

Press the base desk phone button.
Make sure the lifter is lifting the handset high enough to operate
the hookswitch; set to a higher setting if necessary.
Adjust the configuration switch on the base until a dial tone is
heard. The default

A

works for most phones. See

Make a desk

phone call

Fine-tune the listening volume with the headset call control
button. See

Adjust your headset volume

If the volume is still too low, adjust the desk phone listening
volume on the base. See

Adjust your headset volume

I hear static.

Make sure there are at least 12 inches between your base and
your computer, and 6 inches between your base and your
telephone. If adjusting the distance doesn't help, your headset is
going out of range; move closer to the base. See

Position your

base

The sound is distorted.

Lower the desk phone speaking volume and/or desk phone
listening volume on the base. For most telephones, the correct
setting is position 3. See

Adjust your headset volume

If your desk phone has a volume control, lower until the
distortion disappears.
If the distortion is still present, adjust the headset volume control
to lower the headset speaker volume. See

Adjust your headset

volume

Make sure there are 12 inches between your base and your
computer, and 6 inches between your base and your telephone.
See

Position your base

I hear echo in the headset.

Lower the desk phone speaking volume and/or desk phone
listening volume on the base. For most telephones, the correct
setting is position 3. See

Adjust your headset volume

If the audio level is too low in this position, increase the headset
volume. See

Adjust your headset volume

If your speaking volume is too low for your listener in this
position, adjust the position of the headset to make sure the
microphone is as close as possible to your mouth.
Adjust the configuration switch on the base until a dial tone is
heard. The default

A

works for most phones. See

Make a desk

phone call

People I talk to can hear a buzz in
the background.

Move the base further away from your phone. See

Position your

base

If the base power supply is plugged into a power strip, plug it
into the wall directly.

Troubleshooting

Headset

33

Advertising