Plantronics Savi W730-M - Manual (Page 8)

Customise the headset by changing the ear tip, wearing it on the right or
left and optimising the position of the microphone.
The headset comes with a pre-installed ear tip. To install a different ear tip, see the following:
1 Remove the pre-installed ear tip by pushing in and turning the ear tip CLOCKwise, then pull
firmly.
2 Choose the size and style of ear tip that fits most comfortably. Align ear tip tabs with notches in
headset. Push in firmly and twist ANTI-clockwise.
NOTE When installing a gel tip, ensure the raised part of the ear tip is pointed towards the curved
section of the headset as shown.
When you wear the headset, the microphone should rest as close to your cheek as possible
without touching. The microphone can be adjusted inward by the pivoting earpiece to optimise
the position of the headset.
1 Slide the headset over and behind your ear, then press gently towards your ear.
2 Rotate the microphone boom until it is pointed towards your mouth.
Customise your headset
Change the ear tip
Position your headset
8