Plantronics Calisto 240 - Manual (Page 6)

Plantronics Calisto P240 USB Handset 6
3 Using Your Calisto P240 USB Handset
Placing a Call Using Your Soft Client
1 To place a call using the PC only refer to the soft client’s guide.
Placing a Call Using the Dial Pad
1 To place a call with the dial pad (1), dial the desired number
on the P240 dial pad and press the green call/answer function
key (2).
2 If you make an error while dialing you can edit the number by
selecting the back function using the function key (3) under
delete on the LCD (9).
3 If you want to clear the number press the call end button (4),
this will clear the display.
Answering and Ending a Call
1 To answer a call press the green Call/Answer Function Key.
2 To end a call press the red Call End Function Key.
You can also answer a call using the built in speakerphone by
pressing the speakerphone button (8).
Rejecting an Incoming Call
To reject a call press the red Call End Function Key
Answering a Call During an Active Call
If supported by your softphone you can also place the first call
on hold and answer the second call either in your soft client or by
selecting call/answer button. You can manage/resume calls with
the hold function as usual within your softphone.
The second call alert is a soft double beep.
The P240 has two function keys (3 & 5) just under the LCD.
These correspond to the text above them. When pressed they will
perform the task above them in the display at the time they were
pressed. Their function may change as a result of pressing them.
OR
End the current call using the softphone UI on the PC and answer
the incoming call using the PC or green answer button.
Muting the Microphone
1 To mute the microphone during a call, select the mute using
the function key (3) under mute on the LCD. The LCD will
display that the handset is muted and a soft beep will be
played through the speaker.
2 To unmute the microphone, select the unmute function using
the same function key.
Redial
To redial, select menu (3), use the scroll key (6) to highlight redial
and select (3). This will dial the last number called.
Adjusting Incoming Volume
During a call to increase or decrease the incoming volume press
the + or – buttons (7) on the side of the P240. The volume
adjustment will display on the LCD.
To adjust the handset volume when not in an active call select
menu (5) and use the select key (5) to choose handset volume
(using the scroll key (6) will highlight different functions that could
be selected). Once selected press the scroll key up or down to
adjust and then select OK to save. Pressing back before OK will
result in the handset defaulting back to its original setting. Press
back after OK will take you back to the menu, pressing back
again will take you back to the main screen.
For more adjustment options use the volume control available in
Windows or on your softphone application.
Adjusting Call Alert Volume
To adjust the ringer volume when not in an active call select menu
(5) and use the scroll key (6) to highlight Ring Tone press select (5)
and then use the scroll key (6) to highlight Volume and select (5).
Once menu is selected press the scroll key up or down to adjust
volume and then select OK to save the setting. Pressing back
before OK will result in the handset defaulting back to its original
setting. Press back after OK will take you back to the menu,
pressing back again will take you back to the main screen.
You can also turn the ringer On or Off by selecting Ringer On/Off
from the Ring Tone Menu.