Acclaim Lighting AL Dimmer 1 HP - Manual (Page 4)

-4-
Rev1.0
24-004-2824-00
*Please Note: Improvements and specifications in the design of the unit and the manual are subject to
change without any prior written notice.
4.Analog Input Mode
Flipping the dip-switch 11 to "off" position, the analog input is 0-10V and the intensity of LED product can be
set in 0~100%.When the DMX signal/Manual Dim intensity and 0~10V
signal are present, the higher
intensity value will take precedence and override the other one.
Flipping the dip-switch 11 to "on" position, the analog input is 1-10V and the intensity of LED product can be
set in 0~100%. When the DMX signal/Manual Dim intensity and 1-10V analog signal are present, the higher
intensity value will take precedence and override the other one.
With dip-switch 12 in "off" position, the 1-10V analog signal can set the minimum intensity of LED product to 0.
With dip-switch 12 in "on" position, the 1-10V analog signal can set the minimum intensity to 1.
analog