Acclaim Lighting ART IO - Manual (Page 36)

Settings
This page contains all the user settings.
General
You can change the Art IO's label. This label can be used to distinguish the unit in a set-up with multiple
devices.
The 'Blink' check-box will flash the device's LED to help to identify it amongst multiple devices.
DMX Port
Choose here to use the DMX port either as input or as output.
Art-Net
The Art-Net feature in the Art IO supports 1 universes out and 1 universes in. You can map each of those
universes to any of the 256 available universes in the Art-Net protocol. This number is zero-based,
ranging from 0 up to and including 255.
The broadcast messages sent out by Art-Net do put a certain load on the network, therefore it is
recommended to disable Art-Net when not in use.
Art-Net transmission can be switched on or off by the 'Enabled' check-box.
35