Акку-Чек Перформа Нано User Manual

Page 20

Advertising
background image

Here is how to mark a test result and initiate a post-meal reminder:
Perform a test. Do not remove the test strip.

1. Press and release

to toggle through the test result markers and post-meal reminder.

Pre-Meal

Marker

Pre-Meal Marker with Post-Meal Reminder

Post-Meal

Marker

General

Marker

2. When the test result marker ( , , or ) or pre-meal marker with post-meal reminder

( ) that you wish to select appears on the display, remove the test strip from the
meter.

If you select the post-meal reminder, the meter beeps one or two hours after the

pre-meal test to remind you to do a post-meal test.
If you select a test result marker, it is automatically stored in memory.

18

Note:

The post-meal marker automatically appears with the test result if a
test is performed 15 minutes before or after the post-meal reminder is
programmed to beep. Set the post-meal reminder time to one or two
hours in the set-up mode.

44702_EN_PNano_24_Ins.indd 18

44702_EN_PNano_24_Ins.indd 18

10/9/09 2:38:56 PM

10/9/09 2:38:56 PM

Advertising