Акку-Чек Перформа Нано - Manual (Page 50)

Transferring Data Directly to a Computer or PDA Using
Specialized Software and an Infrared Cable
You can transfer your stored results to a computer to track, identify patterns, and
print.
1. Install the software according to the
instructions. To transfer the results to a
computer, connect the infrared cable
according to the instructions.
2. Run the software program and follow the
instructions about how to download
information. Make sure the software is
ready to accept data from the meter.
3. With the meter off, press and hold both
and until two arrows on the display
alternately flash.
48
44702_EN_PNano_24_Ins.indd 48 44702_EN_PNano_24_Ins.indd 48 10/9/09 2:39:00 PM 10/9/09 2:39:00 PM