Sony SLV-SE100K - Manual (Page 20)

20
Setting the clock
Tips
• If you set AUTO ADJUST to ON, the Auto Clock Set function is activated whenever the
VCR is turned off. The time is adjusted automatically by making reference to the time signal
from the station whose programme position is displayed in the “CLOCK PROGRAM” row.
If you do not need the Auto Clock Set, select OFF.
• If you want to return to the previous menu, highlight RETURN and press OK.
Note
• The menu disappears automatically if you don’t proceed for more than a few minutes.
4 Press
M/m to highlight ON, then press OK.
5 Press
m to highlight CLOCK PROGRAM,
then press OK.
6 Press
M/m repeatedly until the programme
position of the station that carries a time
signal appears.
If the VCR does not receive a time signal
from any station, AUTO ADJUST returns
to OFF automatically.
7 Press MENU to exit the menu.
O
PLA
ST :
SLCT :
O
NU IT :
CLOC
ON
1 AA
AUTO AUST
CLOC PROGRA
ANUAL AUST
. 8 TU 8 : 0 0 1 2 . 2 0 0 0 9
O
PLA
CONIR :
SLCT :
O
NU IT :
CLOC
AUTO AUST
CLOC PROGRA
ANUAL AUST
TU 8 : 0 0 8 .
1 AA
2 1 . 2 0 0 0 9
O
PLA
CONIR :
SLCT :
O
NU IT :
CLOC
AUTO AUST
CLOC PROGRA
ANUAL AUST
. 2 0 0 0 TU 8 : 0 0 8 . 9
2 C
2 1
NU