Activeforever PresSsion Sequential Compression Device Multi 3 ( ) - Manual (Page 12)

PresSsion ® Gradient Sequential - Multi 3 & Multi 6
O OP PE ER RA AT TIIO ON N
11. Using the Therapy Timer Control dial (on the Multi 6 model), set the
prescribed time that the patient is to receive compression therapy.
12. Press the Power Switch to the ON position. This starts compression therapy on
the Multi 3 model.
On the front of the Multi 6, the buzzer will sound. You must press the Start
button to begin therapy.
NOTE:
Each chamber of the multi-chamber garment will inflate in sequence
starting with the distal (furthest from the body) and continuing up the
limb.
All chambers will deflate simultaneously and remain deflated for the duration
of the inflation cycle.
13. On the Multi 3 model, note the time the treatment begins so that you can
power off the unit when the desired treatment time has elapsed.
14. Use the Pressure Regulator dial to adjust the pressure during treatment, if
necessary.
9