Activeforever PresSsion Sequential Compression Device Multi 3 ( ) - Manual (Page 13)

10
PresSsion ® Gradient Sequential - Multi 3 & Multi 6
O OP PE ER RA AT TIIO ON N
15. When the treatment is completed (the buzzer will sound, the pressure display
light will turn off, and the garment will automatically deflate on the Multi 6
model), press the Power Switch to the OFF position. This will automatically
deflate the garment.
NOTE:
Leave the pressure control at its position to use the same pressure for
the next treatment. Successive treatments can be given by simply
turning the Power Switch to the ON position (on the Multi 3 model).
DO NOT
unzip the garment when the unit is turned on. This may cause damage
to the garment. Always press the Power Switch to the OFF position when unzip-
ping the garment.
Avoid applying any weight onto the hoses, as it may restrict air flow.
C CA AU UT TIIO ON N