Activeforever Geemarc AMPLI500 Amplified Phone - Manual (Page 15)

15
SETTINGS
Area and Long Distance Code Setting
When you use your phone for the �rst time or if you have moved to a different area code, you need
to enter your area code into the phone. This assures that when dialing a call out of memory or your
phonebook, the number is formatted properly. To set your area code & LDS Code:
Press MUTE
Use ▲ or ▼ to select ‘ SET PHONE’
Press OK
Use ▲ or ▼ to select ‘ SET AREA & LDS’
Press OK
Use ▲ or ▼ to enter your area code. The phone accommodates
up to six (6) digits (allows for International codes).
Once you have entered your area code, even if you are not using
all six (6) digits, press the OK button until you reach
the ‘ SET LDS CODE’ screen
The LDS Code is your long distance code. In the U.S. your long
distance code is 1. The telephone is pre-set for the U.S. (NOTE: Do
not change the LDS code unless you are leaving the U.S.)
If you wish to change the LDS, use ▲ or ▼ to enter your LDS code.
Press OK to con�rm
Press C to exit
www.ActiveForever.com