Activeforever Geemarc AMPLI500 Amplified Phone - Manual (Page 16)

16
USING THE TELEPHONE
Answering A Call
During an incoming call, your phone will ring and then the number and/or the name of the caller will
be displayed on the screen, if you have subscribed to a Caller Display service.
Using the handset
● Lift the handset and speak.
● To end the call, replace the handset.
Hands free
● Your Ampli500 allows you to speak hands free. When the phone rings, press SPKR. The caller’s
voice will be heard through the loudspeaker and they will hear your voice via the microphone near
the SPKR button. The speakerphone symbol will appear on the display.
● To end the call, press SPKR again.
Using the inductive coupler for hearing aids
● Turn your hearing aid to the ‘T’ setting.
● Use the phone handset as usual but the inductive coupler will feed the incoming call directly
into your hearing aid.
Note: users of digital hearing aids must make sure their aids have been programmed for use with
the ‘T’ setting.
Making A Call
Using the handset
● Lift the handset and when you hear the dialling tone, dial the number on the keypad.
● To end the call, replace the handset.
Pre-dialling
● Key in the required number without lifting the handset.
● Use the C key if necessary to cancel and correct a wrong digit.
● Lift the handset and the number will be automatically dialled.
● To end the call, replace the handset.
Hands free
● Key in the required number without lifting the handset.
● Use the C key if necessary to cancel and correct a wrong digit.
● Press SPKR and the number will be automatically dialled. The speakerphone symbol will
appear on the display.
● When the call is answered, simply speak into the microphone located on the base
● You can adjust the speaker level with the slide button located on the left side of your tele-
phone.
● To end the call, press the hands free button again.
www.ActiveForever.com