Activeforever Pride Go Go Elite Traveller Plus Electric Scooter - Manual (Page 30)

30
V I . C O M F O R T A D J U S T M E N T S
Figure 19. Front Storage Area
Figure 18. Seat Height Adjustment
UPPER SEAT POST
LOWER SEAT POST
DETENT PIN
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to different heights.
See figure 18.
1. Remove the seat and battery pack from your
Travel Scooter.
2. Use the attached ring to pull and remove the
detent pin from the lower seat post.
3. Raise or lower the upper seat post to the desired
seat height.
4. While holding the upper seat post at that height,
align the adjustment holes of the upper and
lower seat posts.
5. Fully insert the detent pin.
6. Replace the battery pack and seat.
FRONT STORAGE AREA
Your Travel Scooter is equipped with a front stor-
age area that can be removed if additional leg or
foot room is needed. See figure 19. Remove the
screws to separate the small basket from the Travel
Scooter.
NOTE: As a precaution, avoid placing wallets,
keys, or valuable items in the storage area.
SCREWS REMOVABLE STORAGE AREA