Activeforever Pride Lift Chair Classic Collection 2 Position User Manual
Page 8
8
Lift Chair Series
HAND CONTROL: Contains the controls
needed to operate the various functions
of the lift chair. Refer to the Hand Control
Quick Reference Guide for more
information on hand control options.
SCISSOR MECHANISMS (PINCH POINT):
Extend or retract to take the chair through
the various stages of recline. See pinch
point warning for more information.
QUICK-RELEASE CONNECTOR:
Enables the user to detach the
hand control from the lift chair.
FOOTREST EXTENSION:
Provides 3 in. (8 cm) of extension
and folds up neatly when lift chair
is in the seated or lift positions;
specific to the LL575 and optional
on some other models.
LIFT MECHANISM
(PINCH POINT):
Responds to the hand control
commands to position the
chair in the sit and stand
positions. See pinch point
warning for more information.
BATTERIES (NOT INCLUDED):
Provide the power needed to
return the lift chair to an upright
or semi-upright position in the
event of a power failure. Must be
installed in the external transformer
if equipped with battery backup.
EXTERNAL TRANSFORMER, POWER
CORD: Connects to a standard electrical
outlet to provide power to the lift chair; may
be equipped with an LED which will show
green to indicate power to the transformer.
Refer to the optional wall mounting diagram.
LEG LEVELERS (4): Manually
rotate up or down to stabilize
the chair before use.
BODY COMPONENTS
Lift chairs are equipped with several frame and electrical components. Typically, frame (or body) compo-
nents include a removable back pad*, removable chaise pad*, footrest, leg levelers, a lift mechanism, and
scissor mechanisms. The electrical components include the external transformer, hand control, and bat-
teries
‡
(not included). Refer to
figure 3.1
and note that the illustrations and options listed may not reflect
the type of lift chair that you own.
Figure 3.1 Lift Chair Main Components
I I I . Y O U R L I F T C H A I R