Activeforever Pride Lift Chair Classic Collection 2 Position User Manual
Page 9
Lift Chair Series 9
Removable Back Pad
: Attaches to the lift chair with reusable fasteners to enable the use of the bed
option on some models and to make servicing the chair more convenient.
Removable Chaise Pad
: Attaches to the lift chair with reusable fasteners to make servicing the chair
more convenient.
*NOTE: The lift chair must be in the recline position in order to remove or attach the back pad, chaise
pad, or bed option mattress (LL670 only). If the lift chair is equipped with heat and massage options,
you must also disconnect the heat and massage connections before removing the back pad and/or
chaise pad.
*NOTE: The LL770L bed option consists of a mattress, bedsheet, strap, and storage bag. After
removing the mattress, it is recommended that you store it in the bag provided.
‡
NOTE: The batteries will provide power for only a short period of time after power is removed
from the system, so it is important to act quickly in the event of a power failure. Press and hold
the UP button (switch) on the hand control as soon as possible. Maintain a steady pressure on
the button (switch) to avoid excessive draw from the battery and achieve the most amount of lift.
Keep in mind that the amount of life the batteries will be able to provide is affected by user weight
and battery condition.
WARNING! Pinch/Crush Points Hazard! Be aware that the lift mechanism and scissor
mechanisms are a pinch point on the lift chair. Keep the following items and similar objects
clear of these points when operating the lift chair:
appendages
small children
pets
wires
oxygen tubes
loose items, including but not limited to clothing and blankets
electrical power cords
ELECTRICAL COMPONENTS
Your lift chair is equipped with a low voltage DC electrical system that reduces the standard household
alternating current of 100V AC - 240V AC to direct current (24/39V DC). The electrical components include
the external transformer, batteries (not included), and hand control. Keep these areas free from moisture at
all times.
WARNING! Keep all electrical components free from moisture at all times to prevent shock
and/or electrical hazard.
Batteries:
Provide the power needed to return the lift chair to an upright or semi-upright position in the
event of a power failure. For those models equipped with a battery backup system, the batteries (not
included) must be installed into the external transformer. See IV. “Assembly/Disassembly.”
I I I . Y O U R L I F T C H A I R