00825 - inst08 pg5.pdf, Ne w – AcuRite 00825 Weather Station User Manual

Page 5

Advertising
background image

- 9 -

- 8 -

SECTION 4 • OPERATION

B

C

D

E

DAILY MINIMUM/MAXIMUM TEMPERATURE MEMORY DISPLAY:

Press the MIN/MAX button once to view the MINIMUM recorded values

for temperature, humidity and wind speed. Press the “MIN/MAX”

button again to view the MAXIMUM recorded values for temperature,

humidity and wind speed. While viewing the MINIMUM or MAXIMUM,

press and hold the “MIN/MAX” button for 2 seconds to clear the

currently viewed recorded values.

PRESSURE HISTORY:

Also available to you is the option to go back through the last 12 hours

of pressure readings. Press the “HISTORY” button repeatedly to go

through the barometric pressure history. You must have at least 1 hour

of pressure records to go back through pressure history. WHen the

pressure history reads “-0”, the current pressure is being displayed.

WEATHER FORECAST: ICONS

This feature gives you the predicted weather forecast for the next 12 to

24 hours based on an advanced algorithm that includes barometric

pressure system and temperature tracking. This weather station will

provide the most accurate forecast that a single station weather

instrument can provide.

The forecast will likely show one of the above conditions most of the

time, but will show a combonation when appropriate, and will show

flashing icons when a storm is forecasted.

WEATHER FORECAST: 14 DAY LEARNING MODE

This weather station has a patent pending fourteen day learning mode

calibration process. During this learning mode the weather station will

make altitude calculations that may affect the accuracy of the forecast.

Once the 14 day learning mode process is complete, the learning mode

icon will disappear and the weather forecast should be ready for

superior operation. You can track the progress of the learning mode by

viewing the progress bar located beside the future forecast weather

icon display area.

WIRELESS SIGNAL: RECEPTION ICONS

The main unit has signal reception icons in the outdoor sensor display

areas and near the atomic clock display. If there are a low number of

“bars” present, you may experience no temperature display ( “--” ) or

inaccuracy. See the troubleshooting section for more tips on wireless

signal reception for the sensors and for the atomic clock signal.

N

E

W

NW

SW

NE

SE

S

AM

PM

TIMEZONE

DST

FUTURE FORECAST

OUTDOOR

WIND GUST

WIND SPEED

INDOOR

WIND CHILL

PST MST CST EST

OFF ON

InHg

HISTORY

HR.

PRESSURE

hPa

mph

kph

knots

mph

kph

knots

MIN

MAX

MIN

MAX

MIN

MAX

A

A

A

A

TREND INDICATOR ICONS:

Trend arrow icons will display next to the outdoor temperature and

humidity display as well as next to the (barometric) pressure display.

These arrows will show at a glance if these values are falling, steady or

rising.

WIND CHILL:

When the outdoor temperature falls below 40ºF, the wind chill will be

automatically calculated and displayed. The wind chill display will show

no reading until a wind chill reading is relevant, based on current

conditions.

LOW BATTERY INDICATORS:

When the batteries in the main display unit or in the outdoor sensors

are low, the low battery icon will display. For the main display unit, the

low battery icon will display next to the time. For the outdoor

temperature and humidity sensor, the low battery icon will display next

to the outdoor temperature. For the wind sensor, the low battery icon

will display next to the wind speed.

When batteries need to be replaced, follow the instructions in section 2.

It may take some time for the sensors to reconnect with the main unit

after batteries are replaced.

F

F

F

F

G

H

H

H

H

G

B

C

E

E

E

D

SUNNY

PARTLY COUDY

MOSTLY CLOUDY

RAIN

SNOW

Advertising