Acura 2013 TSX Sport Wagon - Manual (Page 115)

uu Operating the Switches Around the Steering Wheel u Driving Position Memory System
114
Co
ntrols
1. Adjust the driver’s seat to the desired
position, and turn the ignition switch to
ON ( w .
2. Press the SET button.
u You will hear the beeper, and the
memory button indicator light will blink.
3. Press memory button ( 1 or ( 2 within five
seconds of pressing the SET button.
u Once the seat position has been
memorized, the indicator light on the
button you pressed stays on.
1. Move the shift lever to ( P .
2. Apply the parking brake.
3. Press a memory button ( ( 1 or ( 2 ).
u You will hear the beeper, and the
indicator light will blink.
The seat will automatically move to the
memorized position. When it has finished
moving, you will hear the beeper, and the
indicator light stays on.
■ Storing a Position in Memory 1 Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
• You do not press the memory button within five
seconds.
• You readjust the seat position before the double-
beep.
• You turn the ignition switch to any position except
ON
( w.
Memory Button 1
Memory Button 2
Set Button
■ Recalling the Stored Position 1 Recalling the Stored Position
The seat will stop moving if you:
• Press the SET button, or a memory button ( ( 1 or
( 2).
• Adjust the seat position.
• Shift into any position except ( P.
Memory Buttons
13 ACURA TSX 5D-31TL76200.book 114 ページ ２０１２年７月２７日 金曜日 午前９時４２分
QRG
Index
TOC
2013 TSX Sport Wagon