Acura 2010 ZDX - Manual (Page 118)

Position Setup
Here are the two custom settings for
the position setup:
●
MEMORY POSITION LINK
● AUTO TILT AND TELESCOPE
STEERING WHEEL
While ‘‘POSITION SETUP’’ is
shown, press the SEL/RESET button
to enter the customize mode.
Each time you press the INFO
(
▲/▼) button, the screen changes
as shown in the illustration. Press the
INFO (
▲/▼) button until you see
the setting you want to customize,
then press the SEL/RESET button to
enter your selection.
: Press the INFO button ( ▲/▼).
: Press the SEL/RESET button.
Multi-Information Display
114
2010 ZDX