Acura 2010 ZDX - Manual (Page 121)

Press the SEL/RESET button to see
the selections.
Select ON or OFF by pressing the
INFO (
▲/▼) button, then enter
your selection by pressing the SEL/
RESET button.
When your selection is successfully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
If the ‘‘SETTING INCOMPLETE’’
message appears, go back to ‘‘AUTO
TILT AND TELESCOPE STEERING
WHEEL
’’ and repeat the procedure
again.
CONTINUED
Multi-Information Display
117
Instruments
and
Controls
2010 ZDX