Acura 2010 ZDX - Manual (Page 168)

Removing the Head Restraint
To remove a front or rear center
head restraint for cleaning or repair,
pull it up as far as it will go. Push the
release button, then pull the restraint
out of the seat-back.
If for some reason you need to
remove the rear outer head restraint,
push the tilt button, then fold the
head restraint backward. Push the
release button, then pull the restraint
out of the seat-back.
Failure to reinstall the head
restraints can result in severe
injury during a crash.
Always replace the head
restraints before driving.
When reinstalling a head restraint,
put the legs back in place. Then
adjust it to the appropriate height
while pressing the release button.
Make sure the head restraint locks in
position when you reinstall it.
Rear Outer
TILT BUTTON
RELEASE BUTTON
Seats
164
2010 ZDX