Binatone TP-3050 - Manual (Page 6)

6
Do not remove the plug from socket while the appliance is
operating. First, wait for the boiling process to complete.
To prevent uncontrolled spilling of water, do not incline the
thermopot, do not shake it and do not allow the appliance to fall
on the floor.
Do not use the lid to carry the thermopot; always use the special
handle for this purpose.
To avoid electrical current shocks, to not put the thermopot on ice
to cool the water in it.
Do not distort the power cable and do not place it near a source of
heat. Do not wind the power cable around the appliance and do
not put heavy objects on the cable.
Only use a dry cloth to remove dust from the power cable plug or
its contacts.
While disconnecting the appliance from the power grid, to do not
pull the power cable - grasp hold of the plug and pull!
Let the appliance completely cool down before cleaning or storing.
Always disconnect the appliance from the power supply dur-
ing long-term storage, before filling the appliance with water
or emptying and before relocation of the appliance. While
transporting or storing the appliance make sure its empty of
water.
APPLIANCE PARTS
DESCRIPTION
1. Casing (Fig. A)
2. Internal bulb
3. Lid
4. Steam vent
5. Control panel (Fig. B)
Buttons:
“Boil” - boiling
“Dispense” - filling
“Unlock” - unlocking
Indicators:
“Boil” - boiling
“Keep warm” - warming
“Unlock” - unlocking
6. Water supply port
7. Handle
8. Base
9. Water level indicator
10.Power cable slot
11.Removable power cable