ASRock Z77 Extreme11 - Manual (Page 46)

46
ASRock Z77 Extreme11 Motherboard
English
Step 4. Connect a VGA cable or a DVI cable to the monitor connector or
the DVI connector of the graphics card that is inserted to PCIE1
slot.
Step 3. Align and insert the ASRock SLI_Bridge_3S Card to the gold-
fingers on each graphics card. Make sure the ASRock SLI_
Bridge_3S Card is firmly in place.
ASRock SLI_Bridge_3S Card
2.15.2 Installing Three SLI TM -Ready Graphics Cards
Step 1. Each graphics card should have two goldfingers for the 3-Way SLI
Bridge connector. Insert one graphics card into PCIE1 slot, an-
other graphics card to PCIE3 slot, and the other graphics card to
PCIE5 slot. Make sure that the cards are properly seated on the
slots.
Two Goldfingers