ASRock Z77 Extreme11 - Manual (Page 53)

ASRock Z77 Extreme11 Motherboard
53
English
2.16.3 Installing Four CrossFireX TM -Ready Graphics Cards
Step 1. Insert one graphics card into PCIE1 slot, another graphics card
into PCIE3 slot, the third graphics card into PCIE5 slot and the
last graphics card into PCIE7 slot. Make sure that the cards are
properly seated on the slots.
Step 2. Use one CrossFire TM Bridge to connect the graphics cards on
PCIE1 and PCIE3 slots, another CrossFire TM Bridge to connect
the graphics cards on PCIE3 and PCIE5 slots, and use the third
CrossFire
TM Bridge to connect the graphics cards on PCIE5 and
PCIE7 slots. (The CrossFire TM Bridge is provided with the graph-
ics card you purchase, not bundled with this motherboard. Please
refer to your graphics card vendor for details.)
CrossFire TM Bridge
Step 3. Connect a VGA cable or a DVI cable to the monitor connector or
the DVI connector of the graphics card that is inserted to PCIE1
slot.