Garmin GPSMAP 185 Sounder - Manual (Page 68)

Going to a Destination
The GPSMAP 185 Sounder provides four ways to navigate to a destination:
GOTO, MOB, TracBack and route navigation. The easiest method for selecting a
destination is the GOTO function, which lets you select a destination waypoint
and quickly sets a direct course from your present position. The G key can be
used in three ways: from a list of waypoints, graphically from the map display and
from a list of GOTO options. Pressing the G key once shows a list of all way-
points in memory, from which you can select a single destination waypoint.
To activate a GOTO from the waypoint list:
1. Press the G key.
2. Select a waypoint and press T .
Selecting a GOTO Graphically
Pressing the G key twice allows you to graphically select an on-screen way-
point, navaid or cursor position as a destination. A graphical GOTO may be used
to select one of three options from the map display: an existing waypoint, an on-
screen navaid, or a cursor position. If you are selecting a navaid or a new position
as the GOTO destination, the GPSMAP 185 Sounder will automatically create or
move the waypoint named ‘MAP’ at the navaid or map position.
To activate a GOTO from the map display:
1. Press the G key twice.
2. To select an existing user waypoint, highlight the waypoint on screen and press T .
3. To select a navaid, highlight the navaid on screen and press T . The GOTO new way-
point page will appear, displaying the navaid position as a ‘MAP’ waypoint, with the navaid
symbol and text as the default icon and waypoint comment. Press T to save the way-
point and begin navigation.
4. To select a cursor position as your destination, move the arrow cursor to the desired posi-
tion and press T . The GOTO new waypoint page will appear and display the position as
the ‘MAP’ waypoint. Press T to save the waypoint and begin navigation.
58
SECTION
8
GOTO/MOB
Selecting a GOTO
Destination
A B
A. Press GOTO once to select a destination from a list
of waypoints.
B. Press GOTO twice to select a destination waypoint
with the map cursor. If you are not selecting an
existing waypoint as your destination, a new way-
point named ‘MAP’ will be created. Keep in mind
that the MAP waypoint will be overwritten for each
MAP GOTO. This allows you to navigate to on-
screen navaids without permanently storing the
navaid as a waypoint. If you want to save the MAP
waypoint, rename it following the steps on page 39.