Garmin NavTalk - Manual (Page 108)

96
SECTION 6
GPS Receiver
Reference
Simulator Setup Page
6.14.2 Simulator Settings
Mode - lets you turn the built-in simulator on or off.
To enable/disable the built-in simulator:
1. Highlight the ‘Mode’ field and press ENTER.
2. Select ‘Simulator Off’ or ‘Simulator On’ (as desired) and
press ENTER.
Speed - lets you select a simulated speed when the
simulator is enabled.
Track Control - allows the built-in simulator to
automatically align track heading to the desired course
(when using a GOTO or route), or allows you to manu-
ally adjust the track heading, as desired.
Track - allows you to manually enter a track head-
ing. This setting is only available when Track Control is
set to ‘User Track’.
Altitude - allows you to specify a user-defined alti-
tude for your simulated position.
To select a simulator setting:
1. For track control, highlight the ‘Track Control’ field and press
ENTER. Select ‘Auto Track’ or ‘User Track’ and press
ENTER.
2. For simulated speed, user track, or altitude, highlight the
desired field and press ENTER. Enter the desired value
using the ARROW Rocker Pad and press ENTER when
finished.
NvTlkGPS.qxd 2/1/00 4:13 PM Page 36