Garmin NavTalk - Manual (Page 25)

13
To adjust the volume:
1. Press a ZOOM/VOLUME key. When the pop-up menu first
appears the appropriate field is in edit mode: beeper (no
call), ringer (when phone is ringing), and speaker (during a
call).
2. Using the RIGHT or LEFT keys on the ARROW Rocker
Pad, move the indicator to the left for less volume and to
the right for more volume.
3. To highlight a different field, use the ARROW Rocker Pad
UP/DOWN keys. Use RIGHT/LEFT keys to move the indi-
cator. Press QUIT to end or allow to time-out.
2.7 To Adjust Backlighting
The NavTalk’s three-level backlighting is controlled
with the PWR key, and may be adjusted at any time,
from any page.
To turn the backlighting on:
1. Press PWR repeatedly until the backlighting is at the
desired level (off, 1, 2, or 3). Extended press of the PWR key will
shut the unit off.
2.8 Understanding the Status Bar
An important feature of the NavTalk is the com-
bined GPS/Cellular Status Bar that appears at the bot-
tom of every main GPS and Cellular Page. The Status
Bar is important because it lets you know at a glance
the status of all the primary functions of your NavTalk.
The Status Bar appears in two sizes: large and regu-
lar. The large size Status Bar is displayed only at the
bottom of the Cellular Status Page and is divided into
two lines (see figure below).
The top line is dedicated to providing cellular infor-
mation and conveys three main pieces of information:
Getting Started
Tour
SECTION 2
Status Bar at the base
of the
Cellular Status Page.
Zoom/Volume
Keys
Volume Adjust-
ment “Pop-Up”
NavTlkOM.qxd 2/1/00 2:45 PM Page 23