Using fm traffic, Led blink codes – Garmin Nuvi 5000 User Manual

Page 31

Advertising
background image

nüvi 5000 Owner’s Manual

5

Using FM Traffic

Using FM Traffic

Use an FM TMC (Traffic Message

Channel) traffic receiver to receive

traffic information broadcast over the

FM Radio Data System. For information

about FM traffic receivers and coverage

areas, see

www.garmin.com/traffic

.

notE: Garmin is not responsible for

the accuracy of the traffic information.

The FM traffic receiver receives

signals from the traffic service

provider and shows that information

on your nüvi.

notE: The FM traffic receiver and

nüvi must be in data range of an FM

station transmitting TMC data to

receive traffic information.

notE: The nüvi must be connected

to the optional FM traffic receiver to

access traffic information.

notE: If your FM TMC traffic

receiver has an antenna with suction

cups on it, route the antenna on your

windshield vertically using the suction

cups.

LED Blink Codes

The green Power LED lights when

connected to external power. The Status

LED indicates the signal reception:

Yellow dot-dash flashes: determining

which country you are currently in.
Yellow solid: searching for signal.
Red solid: momentary sync loss.
Green solid: normal traffic data.



To the power outlet

in the vehicle

To the power

connector on the

nüvi cradle

Power

LED

Status

LED

Advertising