Garmin Nuvi 5000 - Manual (Page 9)

nüvi 5000 Owner’s Manual 
Getting Started
caution: The permanent
mounting adhesive is extremely
difficult to remove after it is installed.
1. Clean and dry the dashboard where
you are placing the disk.
2. Remove the backing from the
adhesive on the bottom of the disk.
3. Place the disk on the dashboard.
4. Remove the clear plastic cover from
the top of the disk.
5. Place the suction cup mount on top of
the disk. Flip the lever down (toward
the disk).
Step 2: Acquire Satellites
With your nüvi connected to a power
outlet in your vehicle, travel outdoors to
an open area, out of garages, and away
from tall buildings. Stop your vehicle.
Acquiring satellite signals may take a
few minutes.
The bars indicate GPS satellite
strength. When one bar is green, the nüvi
has acquired satellite signals. Now you
can select a destination and navigate to
it. For more information about GPS, see
page 41 and visit www.garmin.com
/aboutGPS .
Step 3: Use the nüvi
A GPS satellite strength.
B
Current time; touch to change time
settings.
C Touch to find a destination.
D Touch to view the map.
E Touch to adjust the volume.
F Touch to use the tools such as media
players, settings, and Help.
A B
C D
E F