Garmin GPSMAP 526s - Manual (Page 35)

GPSMAP 400/500 Series Owner’s Manual 29
Where To?
To clear the active track:
From the Navigation or Perspective 3D chart, select MENU >
Waypoints & Tracks > Active Tracks > Clear Active Track �
The track memory is cleared� The current track continues to be
recorded�
To retrace the active track:
1� From the Navigation or Perspective 3D chart, select MENU >
Waypoints & Tracks > Active Tracks > Follow Active Track �
2� Select either the time the current track began or Entire Log �
3� Follow the colored line on the screen�
To edit or delete a saved track:
1� From the Navigation or Perspective 3D chart, select MENU >
Waypoints & Tracks > Saved Tracks �
2� Select the track you want to edit or delete�
3� Select
Edit Track to change the name or color of the track, or
select Delete to delete the track�
To set active Track Options:
From the Navigation or Perspective 3D chart, select MENU >
Waypoints & Tracks > Active Track > Active Track Options �
Record Mode—select Off , fill , or wrap .
• Off—does not record a track log.
• fill—records a track log until the track memory is full.
• wrap—continuously records the track log, replacing the oldest
track data with new data.
Record interval—defines the frequency at which the track plot is
recorded. Recording more-frequent plots is more accurate but fills
the track log faster.
• interval—sets whether the interval is determined by distance,
time, or resolution. (Select Change to set the value.)
• distance—records the track based on a distance between points.
• Time—records the track based on a time interval.
• Resolution—records the track plot based on a variance from
your course. This setting is recommended for the most-efficient
use of memory. The distance value (Change) is the maximum
error allowed from the true course before recording a track point.
• Change—sets the value of the interval.
Track Color—sets the color of the track plot.