Garmin nuLink! 1695 - Manual (Page 26)

0 nüLink! 1695 Owner’s Manual
Finding Locations
3. Connect your device to your
computer using a USB cable
( page 42 ) to manually transfer
locations to your device.
Locations sent to your myGarmin
account are transferred automatically
to Favorites ( page 16 ) on your device
through nüLink! services.
Simulating a route to a
Location
1. From the main menu, touch Tools
> Settings > System > GPS
Simulator > On > Save.
2. From the main menu, touch
Where To? > Browse Map.
3. Touch an area on the map.
4. Touch Go!.
Entering Coordinates
If you know the geographic
coordinates of your destination, you
can use your device to navigate to
your destination using the latitude
and longitude coordinates. This
can be especially helpful when
geocaching.
1. From the main menu, touch
Where To? > Coordinates.
2. Touch Format to select the
correct coordinate format for the
type of map you are using.
3. Touch the coordinate you want to
adjust.
4. Enter the coordinates.
5. Touch Done.
6. Touch Next.
The coordinates are displayed on
a map.
7. Touch > Set Location.