Garmin nuLink! 1695 User Manual
Page 77
nüLink! 1695 Owner’s Manual
1
Appendix
Problem/Question
Solution/Answer
How do I know my
device is in USB mass
storage mode?
When your device is in USB mass storage mode, a picture of a
device connected to a computer is shown. Also, you should see
two new removable disk drives listed in
My Computer.
My computer never
senses that the device
is connected.
1. Unplug the USB cable from your computer.
2. Turn off the device.
3. Plug the USB cable into a USB port on your computer and
into your device. The device automatically turns on and
goes into USB mass storage mode.
I cannot see any new
removable drives in
my list of drives.
If you have several network drives mapped on your computer,
Windows can have trouble assigning drive letters to your device
drives. See your operating system Help file to learn how to map
or assign drive letters. Ensure your device is connected to a
USB port and not to a USB hub.
How can I find
restaurants near the
hotel I will be staying
at in the future?
1. From the main menu, touch
Where To? > > near.
2. Touch
A Favorite Destination.
3. Touch a destination.
4. Touch
Points of Interest > Food and Drink.
5. Touch a category. Your device searches for locations near
the hotel.
6. Touch a restaurant.
My phone will not
connect to the device.
From the main menu, touch
Tools > Settings > Bluetooth.
Verify that the Bluetooth field is set to
Enabled.
Ensure your phone is turned on and is less than 33 feet
(about 10 meters) away from your device. See
•
•