Garmin GPS 90 - Manual (Page 29)

The last airport page is the runway page, which fea-
tures a diagram of available runways, along with desig-
nations, length, surface and lighting information for the
selected airport.
The runway diagram provides a north-up graphic of
available runways, with length, surface and lighting data
listed below the runway designation. The ‘SURFC’ field
will display one of the following surface types: hard ,
t u rf, sealed, gravel, dirt, soft, unknown or water. The
‘LGHTS’ field will indicate one of five lighting schemes:
part time, full time, pilot controlled (with frequency), no
lighting or unknown.
If a selected airport has more than one runway, addi-
tional runways can be viewed by selecting another run-
way from the designation field.
To view additional runways:
1. Highlight the runway designation field.
2. Press the E key.
3. Use the arrow keypad to toggle through and select the
desired runway.
4. Press E to return the cursor to the ‘DONE?’ prompt.
21
Waypoints
& Database
Airport
Runway Page
Additional runways
are accessed through
the runway designa-
tor field
Pilot controlled
lighting with
frequency listed.
Identifier field
(selectable) Runway
Diagrams
Runway
Designator Field
(selectable)
Runway Data
gps 90 manual 8/6/98 9:58 AM Page 21