Waypoints & database – Garmin GPS 90 User Manual
Page 34
The user waypoint page also allows you to rename any
user waypoint in memory.
To rename a user waypoint:
1. Use the arrow keypad to highlight the ‘RENAME’ prompt.
2. Press the
E
key. The rename waypoint page will appear.
3. Use the arrow keypad to enter the new waypoint name.
4. Press
E
. The highlight will advance to the ‘Yes’ prompt.
5. Press
E
to accept the new name, or
Q
to cancel.
The WPT key is also used to save new waypoints using
the GPS 90’s AutoStore
TM
function. AutoStore allows you
to quickly store your present position and add the new
waypoint to a selected route if desired.
To save your present position using AutoStore:
1. Press the
M
key twice to capture your position
(if you’re already on a waypoint page, you’ll only need to
press the
M
key once).
The AutoStore page will appear, showing the captured
position and a default 3-digit waypoint name. To change
the default position name :
1. Use the arrow keypad to highlight to the name field.
2. Press
E
to begin entry of your waypoint name.
3. Use the arrow keypad to enter the name.
4. Press
E
. The field highlight will move to the ‘route’ field.
If you’d like to add the waypoint to a route:
1. Press the
E
key.
2. Enter the desired route number and press
E
.
3. Press the
E
key to confirm the route number.
To save the AutoStore waypoint:
1. Highlight the ‘save’ field and press
E
.
26
Waypoints
& Database
User Waypoints
& AutoStore
Renaming a user
waypoint.
Marking an
AutoStore position.
gps 90 manual 8/6/98 9:59 AM Page 26