Garmin GPS 90 - Manual (Page 72)

The GPS 90 includes an adjustable yoke mounting
bracket that may be attached to the control yoke for easy
access without blocking the view of the instrument panel.
The standard yoke clamp is designed to fit 90% of general
aviation aircraft. The mount will have to be reconfigured
to fit Bonanza, Baron and some other Beech models with
center column control.
To attach the yoke mount to the control yoke on most
aircraft:
1. Loosen the lower mounting knob.
2. Slide the clamp over the yoke shaft just behind the control
wheel and tighten the lower knob securely.
3. Make sure the clamp is as close as possible to the wheel and
check to ensure that yoke travel is not limited or hindered in
any way by the yoke mount.
64
Appendix B
Installation
For Bonanza, Baron &
other Beech center col-
umn controls, reconfig-
ure the yoke mount
clamp by removing the
upper knob and reat-
taching the clamp from
the right side using the
hole provided.
gps 90 manual 8/6/98 10:01 AM Page 64