Garmin GPSMAP 235 Sounder - Manual (Page 33)

Position Page Options
The position page features an options menu that provides access to functions
and features relating to the position page.
To display the position page options menu:
1. Press O .
There are four options:
• Reset Trip Distance?: Resets the trip odometer (TRP) field to zero.
• Change Data Fields?: Allows you to choose the data displayed in the four user-
selectable data fields. There are eight data types:
• SOG: Speed over ground • ALT: Altitude
• VDC: DC voltage • COG: Course over ground
• TRP: Distance traveled • DPT: Depth
• STW: Speed through water • TMP: Temperature
• Restore Defaults?: Resets all data fields to the factory settings.
• Setup Simulator?: Allows you to define speed, course and position values while in
simulator mode. See the getting started tour for more on using simulator mode.
To select a menu option:
1. Highlight the desired option and press T .
To change a data field:
1. Highlight the ‘Change Data Fields?’ option and press T .
2. Move the field highlight to the field you want to change and press T .
3. Select the desired data field option and press T .
23
SECTION
2
POSITION PAGE
Trip Distance, Date
Fields, Restore Defaults,
and Simulator Setup
A B
A. The four data fields at the top of the Position Page
can be changed by selecting the ‘Change Data
Fields?’ option.
B. Each data field can be set to display speed over
ground, course over ground, distance traveled, alti-
tude, DC voltage, and depth. Speed thru water and
temperature display are available if you are using a
properly equipped transducer.
19000138.10A.QXD 11/11/99 8:47 AM Page 23