Garmin GPSMAP 235 Sounder - Manual (Page 42)

Sounder Page Options (con’t.)
• Change Data Fields?: Allows you to specify the data displayed in each data field on
the Sounder Page. There are thirteen options:
• BRG: Bearing to active wpt • DIS: Distance to active wpt
• SOG: Speed over ground • COG: Course over ground
• ETE: Estimated time enroute • ETA: Estimated time of arrival
• XTK: Crosstrack error • VMG: Velocity made good
• TRN: Turn angle to wpt • VDC: DC voltage
• DPT: Depth • TMP: Temperature
• STW: Speed through water
To change a data field:
1. Highlight the ‘Change Data Fields?’ option and press T .
2. Move the field highlight to the desired field and press T .
3. Select a data field option and press T .
4. When finished, press Q .
• Restore Defaults?: Resets all Sounder Page options except sounder setup to the
factory settings. See page 38 for restoring defaults on the sounder setup page.
32
SECTION
3
SOUNDER PAGE
Data Fields and Restore
Defaults
A. The Sounder Page can be configured to display
up to five data fields simultaneously.
B. Any of thirteen information options may be
shown in a designated data field.
A B
19000138.10A.QXD 11/11/99 8:47 AM Page 32