Garmin GPSMAP 235 Sounder - Manual (Page 58)

48
GETTING START-
ED
Using the GOTO
Key
Map Page Options (con’t.)
•Change Data Fields?: Allows you to specify the type of data that is displayed in each
data field on the map display. There are thirteen options:
• BRG: Bearing to active wpt • DIS: Distance to active wpt
• SOG: Speed over ground • COG: Course over ground
• ETE: Estimated time enroute • ETA: Estimated time of arrival
• XTK: Crosstrack error
• VMG: Velocity made good
• TRN: Turn angle to wpt • WPT: Active wpt name
• DPT: Depth • TMP: Temperature
• STW: Speed through water
To change a data field:
1. Highlight the ‘Change Data Fields?’ option and press T .
2. Move the field highlight to the desired field and press T .
3. Select a data field option and press T .
• Restore Defaults?: Resets all Map Page options (except map configuration options,
see page 46) to the factory settings.
• Setup Simulator?: Allows you to define simulator speed, course, altitude, depth,
and position values. See the getting started tour for details on using the simulator
mode.
This completes the eight map display options. Next we’ll talk about the
Navigation Page.
SECTION
4
MAP PAGE
Data Fields, Restore
Defaults, Setup
Simulator
A B
A. The Change Data Fields? option allows you to
define what type of data is displayed in each data
field of the Map Page.
B. The default option resets all Map Page options to
the factory settings.
19000138.10A.QXD 11/11/99 8:47 AM Page 48