Garmin GPSMAP 76CSx - Manual (Page 38)

 GPSMAP 76CSx Owner’s Manual
M
aIn
p
aGeS
To calibrate the electronic compass:
1. Press MENU > Calibrate Compass.
2. With Start selected, press ENTER, and follow
on-screen directions for holding and turning the
unit.
A message appears notifying you to adjust
your turning speed as needed. Hold the unit
level while turning.
A “Calibration Successful” message appears
when finished.
If a “Calibration Failed” message appears,
repeat the process.
3. Press ENTER to return to the Compass page.
•
•
•
Compass Page Options
Sight ‘N Go—navigate to an object within your
sight.
Stop (Resume) Navigation—turns active
navigation for a route or Go To on and off.
Recalculate—recalculates the path to a
destination.
Course or Bearing Pointer—toggles between
the course pointer and the bearing pointer.
Data Fields—selects the number of data fields
that appear on the Compass page.
Change Data Fields—selects the type of data
you want to show in the data fields.
Calibrate Compass—allows you to calibrate
the electronic compass.
Restore Defaults—returns to factory settings.
•
•
•
•
•
•
•
•