Along track offsets, Flight management, Changing flight plan comments (names) – Garmin G1000 Quest Kodiak User Manual
Page 227
190-00590-02 Rev. A
Garmin G1000 Pilot’s Guide for the Quest Kodiak 100
215
FLIGHT MANAGEMENT
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
4)
Press the EDIT Softkey; or press the MENU Key, select ‘Edit Flight Plan’ and press the ENT Key. The Stored
Flight Plan Page is displayed.
5)
Press the MENU Key to display the Page Menu and turn the FMS Knob to highlight ‘Remove <procedure>’.
6)
Press the ENT Key. The ‘Remove <procedure name> from flight plan?’ window is displayed.
7)
With ‘OK’ highlighted, press the ENT Key. To cancel the request, press the CLR Key, or highlight ‘CANCEL’ and
press the ENT Key.
8)
Press the FMS Knob to remove the flashing cursor.
CHANGING FLIGHT PLAN COMMENTS (NAMES)
The comment field (or name) of each flight plan can be changed to something that is useful for identification
and sorting.
Changing the active flight plan comment:
1)
Press the FPL Key to display the Active Flight Plan Page.
2)
Press the FMS Knob to activate the cursor and turn the large FMS Knob to highlight the comment field.
3)
Use the FMS Knobs to edit the comment.
4)
Press the ENT Key to accept the changes.
5)
Press the FMS Knob to remove the flashing cursor.
Changing a stored flight plan comment:
1)
Press the FPL Key to display the Active Flight Plan Page.
2)
Turn the small FMS Knob clockwise one click to display the Flight Plan Catalog Page.
3)
Press the FMS Knob to activate the cursor and turn the FMS Knob to highlight the flight plan to be edited.
4)
Press the EDIT Softkey; or press the MENU Key, select ‘Edit Flight Plan’ and press the ENT Key. The Stored
Flight Plan Page is displayed.
5)
Turn the large FMS Knob to highlight the comment field.
6)
Use the FMS Knobs to edit the comment.
7)
Press the ENT Key to accept the changes.
8)
Press the FMS Knob to remove the flashing cursor.
ALONG TRACk OFFSETS
A waypoint having an “along track offset” distance from an existing waypoint can be entered into a flight plan.
Along track offset waypoints lie along the path of the existing flight plan, and can be used to make the system
reach a specified altitude before or after reaching the specified flight plan waypoint. Offset distances can be
entered from 1 to 99 nm in increments of 1 nm. Entering a negative offset distance results in an along track
offset waypoint inserted before the selected waypoint, whereas entering a positive offset distance results in an
along track offset waypoint inserted after the selected waypoint. Multiple offset waypoints are allowed.