Garmin GPS 100 - Manual (Page 58)

CHAPTER 10
DATE AND TIME FUNCTIONS
The GPS 100 allows you to view current date and time, set alarm clocks and
timers, and calculate sunrise/sunset times. These functions are accessed
from Navigation Menu 2, illustrated below, which is displayed by pressing the
NAV key. To select a function from this menu, place the cursor over the
desired function and press the ENT key.
NAVIGATION MENU 2
10.1 DATE AND TIME
Local/UTC Select
UTC Date/Time
Local Date/Time
DATE/TIME PAGE
The Date/Time Page displays the date and time in both UTC and local
formats. In addition, you may select local or UTC for time displays on other
pages (for example ETA on the Active Route Page).
To change the time display...
· Use the CLR key to select either “LOCAL” or “UTC”.
10-1