Garmin GPS 100 - Manual (Page 71)

11-9
restored by pressing any key). This feature will help you conserve battery
power.
To set the backlighting timeout...
· Move the cursor over the light timeout select field, press the CLR key
to select the desired timeout delay. You may select 30 seconds, 60
seconds, 120 seconds, or “NONE” (which means the backlighting will
never turn off while the unit is operating).
· Move the cursor over “OK?” and press the ENT key.
The GPS 100 display contrast may be adjusted to suit your viewing angle
needs.
To change the display contrast...
· Move the cursor over “CHANGE CONTRAST?” and press the ENT
key. The page will change as illustrated below.
· Press the right or left arrow key to adjust the contrast.
· Press the ENT key to confirm the contrast changes.
11.6 NAVIGATION DISPLAY UNITS
Position
Distance/Speed Altitude/
Vertical Speed
Pressure Temperature
UNITS PAGE
The GPS 100 allows you to select position, distance, speed, and altitude
units that best suit your needs. In addition, aviation users may select