Garmin GPS 100 - Manual (Page 98)

· With the cursor over “OK?”, press the ENT key. The Mode Selection
Page will be displayed as illustrated below, asking you to select the
operational mode.
Select the simulator mode...
· Use the left arrow key to move the cursor over the operational mode
field.
· Press the CLR key until the “SIMULATOR” option is selected as
illustrated below.
· Move the cursor over “OK?” and press the ENT key. You have just
selected SIMULATOR mode.
The GPS 100 will sound its message tone, flash its Message Annunciator,
and display the Satellite Status Page as illustrated below.
Flashing
Press the MSG key. The Message Page will be displayed as illustrated
below.
The GPS 100 is warning you that it is in the SIMULATOR mode and should
not be used for actual navigation. Press the MSG key to return to the Satellite
Status Page.
15-3