Garmin GNC 300XL TSO - Manual (Page 106)

The Jeppesen database used in the GNC 300XL features standard terminal
arrival routes (STARs) and standard instrument departures (SIDs) that may be
placed into any active or stored route.
Available SIDs may be selected for the departure airport at any time in the active
route as long as the departure airport is the first route waypoint and the route con-
tains more than one waypoint. SIDs may be selected for the nearest airport when the
first route waypoint is not an airport or the route contains less than two waypoints.
Activating a SID will modify the waypoint sequence of Route 0. If you’d like to save
the contents of Route 0, be sure to copy it to an empty storage route first.
To select and activate a SID:
1. Press R and rotate O until the SID select page appears.
2. With the cursor inactive, rotate
K
until the desired SID name appears.
3. Press
C
twice and rotate
O
until the SID name is highlighted.
4. Press E . The SID waypoints will be inserted in the route.
If a SID has more than one runway or transition, the SID select page will display
the available runway designations and/or transitions.
To select a transition:
1. Rotate
O
until the transition name is highlighted and press
E
.
To select a runway:
1. Rotate
O
until the runway designation name is highlighted and press
E
.
96
Selecting a SID transition.
Selecting a SID.
SECTION
6
APPROACH NAV
Selecting &
Activating SIDs
300xl manual 1/25/99 2:36 PM Page 96