Approach nav – Garmin GNC 300XL TSO User Manual
Page 108
Standard Terminal Arrival Routes (STARs) used in the GNC 300XL are selected
and activated with the same procedures as SIDs. Available STARs may be selected for
the destination airport at any time in the active route as long as the destination air-
port is the last waypoint in the active route or the direct-to waypoint. Activating a
STAR will modify the sequence of waypoints in Route 0. If you’d like to save the con-
tents of Route 0, be sure to copy it to an empty storage route first.
To select and activate a STAR:
1. Press
R
and rotate
O
until the STAR select page appears.
2. Press
C
and rotate
O
until the desired STAR is highlighted.
3. Press
E
. The STAR waypoints will be inserted in the route.
If a STAR has more than one transition or runway, the STAR select page will
display the transitions and/or runway designations available.
To select a transition:
1. Rotate
O
until the desired transition is highlighted and press
E
.
To select a runway:
1. Rotate
O
until the runway designation is highlighted and press
E
.
98
Selecting a STAR transition.
Selecting a STAR.
SECTION
6
APPROACH NAV
Selecting &
Activating STARs
300xl manual 1/25/99 2:36 PM Page 98