Garmin GPS 500 - Manual (Page 102)

GPS 500 Pilot’s Guide and Reference 6-4
SECTION 6
WPT PAGES
Selecting a waypoint identifier from a list
of duplicates:
1) Select the desired airport or NAVAID identifier
following the preceding steps under ‘To enter
a waypoint facility name or city location’.
2) A Duplicate Waypoints Window appears (Figure
6-6). Turn the large right knob to select the
desired waypoint and press the ENT Key.
Figure 6-6 Duplicate Waypoints Window
3) To remove the flashing cursor, press the small
right knob.
6.2 AIRPORT LOCATION PAGE
The Airport Location Page (Figure 6-7) displays the
latitude, longitude, and elevation of the selected airport.
The Airport Location Page also displays facility name and
location, as well as fuel availability, available approaches,
radar coverage, and airspace type.
To view location information for a particular airport
on the Airport Location Page, enter the airport’s identifier
per Section 6.1.
8
5
2
3
1
4
9
7
6
Figure 6-7 Airport Location Page
1 Best Available Approach
2 Position (Latitude/Longitude)
3 Facility Name and Location (City)
4 Airport Identifier, Symbol, and Type
5 Field Elevation and Available Fuels
6 Radar Coverage and Airspace Type
7
Position of Current Page within Current Page
Group
8 Current Page Group
9 Number of Pages in Current Page Group
190-00181-60 Rev. G