Garmin GPS 500 - Manual (Page 47)

GPS 500 Pilot’s Guide and Reference
SECTION 2
NAV PAGES
2-21 190-00181-60 Rev. G
2.7 NAV/COM PAGE
The NAV/COM (navigation communications) Page
(Figure 2-42) provides a list of the airport communication
and navigation frequencies at the departure, enroute, and
arrival airports. The NAV/COM Page makes display of
the frequencies needed along the flight plan quick and
convenient. If there is no active flight plan with a departure
airport, the NAV/COM Page displays the frequencies for
the airport nearest the departure position.
Figure 2-42 NAV/COM Page
Departure, Enroute,
or Arrival Airport
Assigned Frequency and
Usage Information
(when applicable)
Frequency
Type
Number of Pages in
Current Page Group
Position of
Current Page
within Current
Page Group
Current
Page Group
NOTE: The NAV/COM Page may be the fourth or
fifth page in the NAV Page Group when the GPS
500 installation includes connection to traffic
and/or weather information sources. See the
400/500 Series Display Interfaces Pilot’s Guide
Document (190-00140-10) or Section 12 of this
manual for more information
Selecting a frequency list for a departure,
enroute or arrival airport:
1) Press the small right knob to activate the
cursor.
2) Turn the large right knob to place the cursor
on the airport identifier field (top line on the
NAV/COM Page, see Figure 2-42).
3) Turn the small right knob to select the desired
airport (Figure 2-43) and press the ENT Key.
Figure 2-43 Airport Window