Creating and using waypoints, Creating waypoints using the enter/mark key – Garmin GPSMAP 3005C User Manual

Page 20

Advertising
background image



GPSMAP 3005C Owner’s Manual

b

AsIc

o

PerAtIon

>

c

reAtIng

And

u

sIng

w

AyPoInts

4. Some items have a

Filter List button that allows you to enter letters or

numbers of the item name. The search result shows only items matching

the entered letters or numbers. Highlight the

Filter List button, and press

ENTER. Enter data, as needed, to narrow your search.

To find an item from another location on the map:

1. Open the Map Page. Use the

ROCKER to pan to the location you want,

and then press

FIND. The Find From (Location) Page appears.

2. Using the

ROCKER, highlight a category, and press ENTER.

To view details about an item:

Highlight an item in the search results list, and press

ENTER. The Review

Page appears, showing item information, map location, chart name,

distance/bearing, and options for creating a waypoint or viewing the next

item in the search results list.

Item

nformaton

Dstance,

bearng,

chart name

of tem

Soft key

Creating and Using Waypoints

The GPSMAP 3005C stores up to 4,000 alphanumeric waypoints, each with a

user-defined icon, comment, depth, and water temperature.

NOTE: If you are using an optional Garmin GSD 20, GSD 21, or GSD 22

sounder module, the Depth and Water Temp fields fill in automatically.

You can create waypoints using three basic methods:

ENTER/MARK—use the ENTER/MARK key to quickly mark your

current location.

Graphically—use the map display to define a new waypoint location.
Manually—enter new waypoint coordinates manually.

Creating Waypoints Using the ENTER/MARK Key

Use the ENTER/MARK key to capture your current location (or pointer or map

item location) to create a new waypoint. You must have a valid position fix to

mark your current location.

To mark your current location:

1. Press and hold

ENTER/MARK until the Review Waypoint Page appears.

The GPSMAP 3005C captures its current location and creates a default

name and symbol for the new waypoint.

2. To accept the waypoint with the default name and symbol, press

ENTER.

To change any of the available waypoint information, see

page 15

.

b

as

Ic

o

pera

tIon

Advertising