Garmin GPS 12MAP - Manual (Page 42)

32
To select an on-screen waypoint with the
panning arrow:
1. Use the rocker keypad to highlight the desired
waypoint.
2. Press ENTER to review information for the
selected waypoint.
3. To exit the information page, press QUIT.
To GOTO a highlighted waypoint:
1. With the waypoint highlighted, press GOTO,
followed by ENTER.
The GOTO function can be used anywhere
on the map. If a waypoint or highway exit is not
highlighted, a new waypoint (called ‘MAP’) will
be created at the arrow location before the
GOTO is initiated. If want to save this
waypoint, rename it, as the next ‘MAP’
waypoint entered will override the current one.
To cancel the pan function and re-center
the map on your position:
1. Press the QUIT key.
Highway exit information is also available
when using the pan function. Simply place the
panning pointer over the exit location to
retrieve additional information—including
available services—about the exit. Exit informa-
tion is generally limited to interstate highways
and is categorized into two types:
Common Exits— traditional ramp, cloverleaf
or intersection exits.
Special Exits— rest areas, service areas, toll
booths, welcome centers and weigh stations.
Common exits are depicted with an open
square icon when services are available and a
filled-gray square icon when no services are
available.
REFERENCE
Map
Page
By placing the panning
arrow over an on-screen
waypoint and pressing
GOTO, you don’t need to
manually select your
destination from the
GOTO page.
For a selected highway
exit, the Exit Info Page
displays the number of
available services and
icons depicting the type
of available services