Garmin GPS 12MAP - Manual (Page 80)

70
REFERENCE
Main Menu/
Setup Menu
‘Trip Computer’ provides
readouts for the trip
odometer, trip timer, av-
erage speed and maxi-
mum speed. Options are
provided to reset these
figures.
Setup Logging - provides a setup screen to
define how track log data will be recorded.
The Setup Logging Page provides options for
‘Record Mode’, ‘Interval’ and ‘Interval Value’.
Record Mode lets you select one of three
track recording options:
‘Off’ – No track log will be recorded.
NOTE: Selecting ‘Off’ will prevent you from
using the TracBack feature.
‘Fill’ – A track log will be recorded until the
track memory is full.
‘Wrap’ (default) – A track log will be
continuously recorded, wrapping through
available memory; replacing the oldest track
data with new data.
Interval defines the frequency with which the
track plot is recorded. Three interval settings
are available:
‘Resolution’ (default) – Records track log
based upon a user-defined variance from
your course over ground. The resolution
option is recommended for the most efficient
use of memory and TracBack performance.
The distance value (entered in the ‘Interval
Value’ field) is the maximum left/right
deviation allowed from the last defined
ground track before recording a new point.
‘Time’ – Records track log based on a user-
defined time interval.
‘Distance’ – Records track log based on a
user-defined distance between points.
Interval Value defines the distance or time
interval used to record the track log.
Trip Computer— provides readouts for
average speed, maximum speed, odometer,
trip odometer and trip timer. These readouts
can be reset from the Trip Computer Op-
tions.